19
PREPARATION
Parts and Components
Front
* This Laser TV is manufactured using high-precision technology. You may, however,
see tiny black dots and/or bright spots that continuously appear on the screen. This is
a normal result of the manufacturing process and does not indicate a malfunction.
* Ceiling light glare depends on the light levels in a room and the distance between the
product and the ceiling. It is not a product defect.
Control Panel
Vent
1
Vent
1
Electric Door
Speaker
USB IN 2 Port
Button Description
,
Changes the channel or sets the features.
-, +
Adjusts the volume level, or enters a sub menu and changes
the
settings.
OK Shows the current mode and saves changes to the settings.
SETTINGS Displays or closes the Settings menu.
INPUT Changes the input source.
(Power) Turns the the Laser TV on or off.
1 Due to the high temperature of the vent area, do not get close to the vent area.
• Press the "USB IN 2" label shown in the figure above to make the USB IN 2 port
visible.
NOTE
To Next Page
Loading...
Need help?
General
