34
Setting Up the TV
Watching TV
1 When in Standby mode, press the
POWER button to turn the Laser TV
on.
2 Press the INPUT button and select
the input signal you want.
3 Control the Laser TV using the
following buttons while watching the
screen.
Button Description
CH ,
Changes the TV channel.
LIST
Displays the channel list.
0 - 9
Enters a channel number.
VOL -, +
Adjusts the volume level.
MUTE
Mutes the sound from the
Laser TV.
FLASHBK
Displays the channel you
were watching previously.
Edge Adj
Adjusts the image to fit the
screen.
4 To turn off the Laser TV, press the
POWER button.
To Next Page
