76
CUSTOMIZING SETTINGS
Item Description
Auto Power Makes the Laser TV turn on automatically when the power cord is
connected.
Item
On When the power cord is connected to the Laser TV,
it turns on automatically.
Off When the power cord is connected to the Laser TV,
it goes into standby mode.
Power
Sound
The alert sound plays upon turning on/off the power.
High Altitude If the Laser TV is used at an altitude higher than 1200 meters, turn
this option on.
When High Altitude is not enabled, the Laser TV may overheat or its
protection function may be activated. If this happens, turn the Laser
TV off and then on again after waiting for several minutes.
Test Pattern You can run this option when installing the Laser TV to adjust the
screen size and focus.
• While you use the Test Pattern option, the keys on the control
panel do not work.
NOTE
Auto Input
Search
Automatically searches for and displays the input signal type when it is
received. It is available only with external inputs (RGB, HDMI, AV and
Component).
To Next Page
Loading...
Need help?
General
