EasyManua.ls Logo

LG LSGL6337F - Conversion to Lp Gas

LG LSGL6337F
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-1
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
CONVERSION TO LP GAS
CONVERTING THE SEALED BURNER MODEL
GAS RANGE FOR USE ON LP (PROPANE) GAS.
This range leaves the factory set for use with natural gas.
When converting to LP gas, keep these instructions in
case you need to convert back to natural gas. And save
the orifices removed from the appliance for future use.
CAUTION
This conversion kit shall be installed by a qualified
service agency in accordance with the
manufacturers instructions and all applicable
codes and requirements of the authority having
jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing
property damage, personal injury or loss of life. The
qualified service agency is responsible for the
proper installation of this kit. The installation is not
proper and complete until the operation of the
converted appliance is checked as specified in the
manufacturers instructions supplied with the kit.
WARNING
Turn off the electrical supply and
gas supply going to the range.
Replace all panels and parts before
operating.
RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
Be careful when you work on the gas
range handling the sheet metal part.
- Sharp edge may be present and you can cut
yourself.
TOOLS REQUIRED:
• Adjustable wrench
13/32” or 10 mm open-end wrench
5/16” or 8 mm open-end wrench
16/32” or 16 mm open-end wrench
9/32” or 7mm tough wrench
• Phillips head screwdriver
Flat bladed screwdriver(blade width
approximately 3/32” across)
• Nut drivers : 13/32” or 10 mm
9/32” or 7 mm
• LP (Propane) Gas Orifice Specifications
BURNER OUTPUT RATINGS; BTU/HR
LP(Propane) Gas. 10”W.C.P
MODEL
BURNER
BTU
RATE
ORIFICE
CODE
BTU
RATE
ORIFICE
CODE
LSGL6337F LSGL6335F
LF 12,000 1.04 12,000 1.04
LR 7,500 0.82 7,500 0.82
RR 4,000 0.62 4,000 0.62
RF 16,000 0.50(In) / 1.10(Out) 12,500 1.08
CTR 10,000 0.95 10,000 0.95
BROIL 12,500 1..08 12,500 1.08
BAKE 17,000 1.25 17,000 1.25
F
Y
Top Burner and Bake burner orice
Broil burner orices
Denotes orice code
• Natural Gas Orifice Specifications
BURNER OUTPUT RATINGS; BTU/HR
Natural Gas, 5”W.C.P
MODEL
BURNER
BTU
RATE
ORIFICE
CODE
BTU
RATE
ORIFICE
CODE
LSGL6337F LSGL6335F
LF 18,000 1.97 18,000 1.97
LR 9,100 1.34 9,100 1.34
RR 5,000 1.02 5,000 1.02
RF 22,000 0.85(In) / 2.00(Out) 20,000 2.08
CTR 10,000 1.42 10,000 1.42
BROIL 13,500 1.62 13,500 1.62
BAKE 19,000 1.98 19,000 1.98
P
Bake burner orice
Top burner and Broil
burner orices
Denotes orice code
CONVERSION KITS
LP(PROPANE) GAS
CONVERSION INSTRUCTIONS

Table of Contents

Related product manuals