LG LSGL6337F - CHECK the FAILURE CODE (F-Code)

8-1
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
CHECK THE FAILURE CODE (F-code)
■ When the oven has some failure on cooking,
-. Cancel the cook.
-. In case of failure, F-code will not display.
-. It memorizes F-code logs in EEPROM.
■ Check the failure code as below steps.
1. Press the any button, and Mode knob is placed in the Off
2. Press the "4" and "6" key at the same time for 1 second.
If the oven has some failure, the oven will show the failure code, like FIG. 1
It shows the type of F-code and times of occurred failure alternately for each 4 seconds
< FIG. 1 >
Type of F-Code Times of the occurred Failure
If the oven does not have any failure, the oven will display like FIG. 2
< FIG. 2 >
NO ERROR
NOTE:
After checking the failure code, turn the mode knob.