3-15
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS
REMOVING THE OVEN TEMPERATURE SENSORS
1. Turn off the electrical supply and gas supply going
to the range.
2. Open the oven door and remove the racks from
the oven.
3. To remove an oven temperature sensor :
a) Remove 1 screw in the oven cavity.
b) Remove the back cover (see “Removing the
Back Cover” Page 3-2).
c) Disconnect the wire connection.
d) Remove the oven sensor.
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
•
RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
To Next Page
Loading...
