14
ENGLISH
WATCHING TV
WATCHING TV
Connecting an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV referring to the following. The illustrations may
differ from the actual accessories and an RF cable
is optional.
Connecting an antenna or basic
cable
Connect the Monitor set to a wall antenna socket
with an RF cable (75 ohm).
Connecting with a cable box
Connect the Monitor set to a cable box and the
cable box to a wall antenna socket with 2 RF
cables (75 ohm).
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an antenna
connected, aim the antenna to the proper
direction.
y
Visit
http://AntennaWeb.org
for more
information about the antenna and cable
connection.
NOTE
y
Make sure not to bend the copper wire of
the RF cable.
y
Complete all connection instructions
between devices, and then connect the
power cord to the power outlet to prevent
damages to your Monitor set.
CAUTION
Copper wire
Wall Antenna Socket Outdoor Antenna
To Next Page
Loading...
