5
ENGLISH
ASSEMBLING AND PREPARING
Lifting and moving the
Monitor set
When moving or lifting the Monitor set, read the
following to prevent the Monitor set from being
scratched or damaged and for save transportation
regardless of its type and size.
Setting up the Monitor set
Attaching the Stand Base
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.
Lay a foam mat or soft protective cloth
on the surface to protect the screen
from damage.
CAUTION
CAUTION
y
It is recommended to move the Monitor
set in the box or packing material that the
Monitor set originally came in.
y
Before moving or lifting the Monitor set,
disconnect the power cord and all cables.
y
Hold the top and bottom of the Monitor
set frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
y
When holding the Monitor set, the screen
should face away from you to prevent the
screen from scratches.
y
When transporting the Monitor set, do not
expose the Monitor set to jolts or excessive
vibration.
y
When transporting the Monitor set, keep the
Monitor set upright, never turn the Monitor
set on its side, or tilt towards the left or right.
Detaching the Stand Base and Body
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
2
Turn the screw to the left, and then pull out
the
Stand Base
from the
Stand Body
.
2
Attach the
Stand Base
from the set by turning
the screw to the right with a
Coin
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
