10
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports the Plug & Play*
feature.
* Plug & Play: Plug and play is a computer feature
that allows the new device, normally a peripheral,
without requiring reconfiguration or manual
installation of device drivers.
y
If you do not use an optional external
speaker, connect the PC to the Monitor set
with the optional audio cable.
y
The Audio cable is optional. You can
obtain additional accessories from most
electronics stores.
y
If you turn the Monitor set on when the set
becomes cold, the screen may flicker. This
is normal.
y
Some red, green, or blue spots may appear
on the screen. This is normal.
NOTE
RGB connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations. To transmit an audio signal,
connect an optional audio cable as shown the
following illustrations.
y
Connect the signal input cable
and tighten it by turning the
screws clockwise.
y
Do not press the screen with
your finger for a long time as this may
result in temporary distortion on the screen.
y
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
CAUTION
(MONO)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
