LG M2241A - Time and Option Settings

30
ENGLISH
CUSTOMIZING SETTINGS
TIME settings
1
Press
MENU
to access the main menus.
2
Press the Navigation buttons to scroll to
TIME
and press
ENTER
.
3
Press the Navigation buttons to scroll to the setting or option you
want and press
ENTER
.
- To return to the previous level, press
MENU
.
4
When you are finished, press
EXIT
.
When you return to the previous menu, press
MENU
.
The available time settings are described in the following:
Setting Description
Clock You must set the time correctly before using on/off time function.
If current time setting is erased by a power failure or the Monitor set is unplugged, reset the
clock.
Off Time
/
On Time
Sets the time to turn on or off the Monitor set automatically. To use this function, you should set
the current time and date in the Clock menu.
NOTE
y
If you do not press any button within 2 hours after the Monitor set turns on by the On
Time feature, the Monitor set enters the Standby mode automatically.
y
If you set the On Time feature and turn the Monitor set off by disconnecting Main power,
the On Time feature will not work. To activate the On Time feature, the Monitor set must
be in Standby mode.
y
If you set both Off Time and On Time features to the same time, the Off Time function
works in on use and on time function works in off case.
Sleep Timer Sets the length of time until the Monitor set to turned off. When you turn the Monitor set off and
then turn it on again, the Sleep Timer will be set to off.
Auto Off If the set is switched on and there is no input signal, it will switch off automatically after 15
minutes.
TIME
Clock
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Off : Off
Move Enter