18
ENGLISH
WATCHING TV
-
16:9
: The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen.
-
Just Scan
: Following Selection will lead you to
view the picture of best quality without loss of
original picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
-
4:3
: The following selection will allow you to
view a picture with an original 4:3 aspect ratio,
black bars will appear on both the left and right
of the screen.
-
Zoom 1 & 2
: The following selection will allow
you to view the picture without any alteration,
while filling the entire screen. However, the top
and bottom of the picture will be cropped.
Just Scan
Using additional options
Adjusting aspect ratio
Resize the image to view the image at its optimal
size by pressing
ARC
while you are watching
Monitor set.
y
If a fixed image displays on the screen for
a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is “image burn” or “burn-
in” and not covered by the warranty.
y
If the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on
the letterboxed area of the screen.
CAUTION
y
You can only select
4:3, 16:9 (Wide)
in
RGB
mode.
y
You can only select
4:3, 16:9 (Wide)
in
HDMI
mode.
y
In
HDMI
(over 720p) mode,
Just Scan
is
available.
y
You can only select
4:3, 16:9 (Wide),
Zoom1/2
in
TV
and
AV
mode.
NOTE
Using the input list
Selecting an input source
1
Press
INPUT
to access the input source list.
2
Press the Navigation buttons to scroll to one of
the input sources and press
ENTER
.
Input source Description
Antenna Watch TV over the air and cable
AV Watch the contents in a VCR or
other external devices
RGB View a PC display on the screen
HDMI Watch contents in a DVD or Digital
settop box or other high definition
devices
To Next Page
Loading...
