15
MULTI Standard
Indoor Unit
8. Installation
8.1 Selection of the best location
• The unit must be installed indoor area.
• Do not install the unit near the door.
• There should not be any obstacles to the air circulation or installation. Ensure the spaces from the wall, ceiling,
or other obstacles.
• The place where the indoor unit can be connected with outdoor unit easily.
• The place where the unit is leveled.
• The place shall allow easy water drainage.
• The place where bear a load exceeding four times of the indoor unit weight.
• The mounting ceiling or wall should be solid enough to protect it from the vibration.
• The place where the unit is not affected by an electrical noise.
• The place where noise prevention is taken into consideration.
• The place where the maintenance space for product is sufficient.
• There should not be any heat source or steam near the unit.
• Please read the instruction sheets completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards.
• Teach the customer the operation and maintenance procedures, using the operation manual. (air filter cleaning,
temperature control, etc.)
More than 100 (3-15/16)
More than 100 (3-15/16)
More than 200 (7-7/8)
[Unit : mm(inch)]
To Next Page
Loading...
