EasyManua.ls Logo

LG MULTI AMNQ09GSJAA - List of Function

LG MULTI AMNQ09GSJAA
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
MULTI Standard
Indoor Unit
1. List of Functions
List of function
Category Functions
AMNQ09GSJAA
AMNQ12GSJAA
AMNQ18GSKAA
AMNQ24GSKAA
Air Flow
Air Supply Outlet 1
Airflow Direction Control (left & right) Manual
Airflow Direction Control (up & down) Auto
Auto Swing (left & right) X
Auto Swing (up & down) O
Airflow Steps (fan/cool/heat) 6 / 6 / -
Fan Speed Auto*
X
Power Cool/Heat O / X
Swirl Wind*
X
Refresh Mode** X
Smart Mode** X
Indirect Wind*
X
Direct Wind*
X
Dry Operation O
Air Purification
Air Purify X
Ionizer X
UV-C X
Pre-Filter O
PM1.0 Filter X
Reliability
Hot Start X
Self Diagnosis X
Convenience
Auto Mode O
Auto Dry Operation O
Auto Restart O
Child Lock* X
Forced Operation O
Group Control* X
Sleep Timer O
Turn On/Off Reservation O
Schedule* X
Two Thermistor Control* X
External On/Off X
Installation
Drain Pump X
E.S.P. Control* X
High Ceiling Operation* X
Special Functions
Wi-Fi X
Auto Elevation Grille X
Human Detection Function** X
Floor Detection Function** X
Note
1. O : Applied, X : Not Applied, - : Unconfirmed or irrelevant
Embedded : A kit is provided by default for using this function when the product is manufactured.
Accessory : Ordered and purchased separately the accessory package referring to the model name provided and install at field. Accessory line-ups
varies by region, so check your local catalogue or local sales material.
2. Some functions can be limited by remote controller.
3. In case of cassette type indoor units, Air Purification Kit and Auto Elevation Grille functions are not applicable at the same time.
4. ‘Auto Mode’ varies depending on the outdoor unit type.
- Auto Change Over(Single Heat Pump Outdoor Unit)
- Auto Mode Select(Multi Heat Pump Outdoor Unit)
- Auto Intensity Control(Cooling Only Outdoor Unit)
5. * : These functions need to connect the wired remote controller.
6. ** : This functions need to connect to the Standard III wired remote controller.

Related product manuals