LG PH30JG - Battery Management; Battery Status and Charging

29
ENGLISH
USING THE PROJECTOR
Using The Battery
The battery is low. Connect a power
supply for charging.
• It is displayed when the battery is low (Energy Saving will be changed Maximum
mode and will be disabled).
• If the screen shows a low battery message, be sure to charge the battery.
The device powers off due to insufficient
battery.
• It is displayed when the battery is running out.
• As your battery is running out, the projector will turn off immediately.
• If the battery runs out, the projector can only be turned on after it has been
connected to a power supply.
• If power is supplied via USB-C, the product can only be turned on again after the
battery has been charged for at least a few minutes.