EasyManuals Logo

LG RC689D User Manual

LG RC689D
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
System Setting32
System Setting
3
Disc Settings
Disc Format
If you load a completely blank disc, the recorder will
initialize the disc.
[DVD-R]
The recorder initialize the disc to Video mode.
The recording mode will always be Video
mode.
[DVD-RW/DVD+RW/DVD+R(DL)]
The Initialize menu will appears. Select
[OK] then press ENTER (
b
). DVD-RW disc is
initialized to Video mode.
Also, you can reformat the DVD-RW/DVD+RW from
the Setup menu as below.
1. Select [Disc Format] option then press
d
.
2. Press ENTER (
b
) while [Start] is selected.
Format Disc menu appears.
3. Use
a/d
to select a desired mode (VR Mode
or Video Mode) then press ENTER (
b
).
Conrm message will appear.
For DVD+RW discs, go to step 4.
4. Use
a/d
to select [OK] then press ENTER (
b
).
It takes a few moments to initialize the disc.
If you want to change the disc format,
everything recorded on the disc will be erased.
>
Caution
Finalize
Finalizing [xes] the recordings in place so that
the disc can be played on a regular DVD player
or computer equipped with a suitable DVD-ROM
drive.
Finalizing a disc creates a menu screen for
navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
y
Once you have nalized a DVD-R and
DVD+R disc, you cannot edit or record
anything else on that disc.
y
You can record and edit a DVD-RW disc by
choosing [Unnalize] option.
y
You can edit or record on the DVD+RW disc
even after nalizing.
>
Caution
1. Select [Finalize] option then press
d
.
2. Press ENTER (
b
) while [Finalize] is selected.
Finalize menu appears.
3. Select [OK] then press ENTER (
b
).
The recorder starts nalizing the disc.
y
How long nalization takes depends on the
type of disc, how much is recorded on the
disc, and the number of titles on the disc.
y
DVD+R DL disc can take up to 30 minutes
to nalize.
y
If you load a DVD-RW that has already been
nalized, you can ‘Unnalize it by choosing
Unnalize from the Finalize menu. After
doing this, you can edit and re-record onto
the disc.
y
You cannot unnalize a DVD-R and DVD+R
disc.
y
If [Disc Protect] option is set to [ON], the
nalize is not available. To nalize, set [Disc
Protect] option to [OFF].
,
Note

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG RC689D and is the answer not in the manual?

LG RC689D Specifications

General IconGeneral
BrandLG
ModelRC689D
CategoryDVD Player
LanguageEnglish

Related product manuals