LG RESU FLEX - Safety Gear; Standing Installation

22
3.5 Safety Gear
Wear the following safety gear when dealing with the battery pack.
Installers must meet the relevant requirements on the national standards,
such as IEC 60364 or the domestic legislation.
Insulated gloves Safety goggles Safety shoes
3.6 Standing Installation (Basic Standing / Optional Standing)
3.6.1 Items for Stand type (Basic Standing / Optional Standing)
• M6 Wrench Bolt
• Basic Standing Bracket
• Handle
• Corner Bracket, Single Corner cover, Wall Standing Bracket
• BMA Inter Cable Assembly, BMA TML End CNT Assy, Terminal Cover
End Assy
3.6.2 Clearance
At least
300mm
At least
500mm