LG RESU FLEX - LED Fault Indicator ON Issues

ENGLISH
55
5. If the battery setup is correct, but the battery is still non-operational,
turn off the circuit breaker
6. Contact LG Energy Solution regional service contact point.
If the LED fault indicator is ON
1. Check if the inverter recognizes the battery. Refer to the inverter’s
troubleshooting guide for battery setup instructions.
2. If the inverter is connected to the internet, collect the log les from the
inverter company.
2-1. Send the fault ID to LG Energy Solution regional contact point.
2-2. Turn off the circuit breaker.
2-3. Wait further instruction from LG Energy Solution.
3. If the inverter is not connected to the internet, check the inverter LCD to
read the battery’s fault ID. Refer to the inverter’s troubleshooting guide
for instructions.
3-1. Send the fault ID to LG Energy Solution regional contact point.
3-2. Turn off the circuit breaker.
3-3. Wait further instruction from LG Energy Solution.