LG SA560 - Page 88

88
SERIAL COMMUNICATION FUNCTION
12. Black Level (Command: nm)
► Adjusts the black level.
Disabled when the Black mode is selected.
Transmission [n][m][][Set ID][][Data][Cr]
Data 00:
Low
01:
High
(* Transmitted in hexadecimal code)
Ack [m][][Set ID][][OK][Data][x]
Data 00:
Low
01:
High
13. Energy Saving (Command: np)
► Sets the energy saving mode.
Transmission [n][p][][Set ID][][Data][Cr]
Data
00:
Minimum
01:
Medium
02:
Maximum
(* Transmitted in hexadecimal code)
Ack [p][] [Set ID][][OK][Data][x]
Data
00:
Minimum
01:
Medium
02:
Maximum
14. Auto Cong . (Command: ju)
►
Optimizes the screen automatically in PC
input mode.
Transmission [j][u][][Set ID][][Data][Cr]
Data 01:
To set
(* Transmitted in hexadecimal code)
Ack [u][] [Set ID][][OK][Data][x]
Data 01:
To set
15. Input Select (Command: xb)
► Select the input signal of the set.
Transmission [x][b][][Set ID][][Data][Cr]
Data
20:
AV
40:
Component
60: RGB 1 61: RGB 2
90: HDMI
(* Transmitted in hexadecimal code)
Ack [b][] [Set ID][][OK][Data][x]
Data
20:
AV
40:
Component
60: RGB 1 61: RGB 2
90: HDMI A0: HDMI-PC
16. Key (Command: mc)
► Sends a key code of the IR remote control.
Transmission [m][c][][Set ID][][Data][Cr]
Data Key Code: see page 90 .
(* Transmitted in hexadecimal code)
Ack [c][] [Set ID][][OK][Data][x]