Servicing 5
Inspection and maintenance every 500 to 1000 operating hours or once a year
¾ Check function of tension springs (arrow
centre).
¾ Apply Molykote-G paste to bearing surface
of pedal (poss. oil, do not grease under any
circumstances).
Adjust drive control pedal system
CAUTION
Observe setting of drive control pedal system (ar-
row right).
(Re-)Adjustment of the drive control pedal sys-
tem may only be carried out by trained specialist
staff !
Please therefore contact your authorised dealer.
Operating Instructions – 386 807 1001 EN – 03/2006 109
To Next Page
Loading...
