4 Operation
Standard equipment
e3861327
1
2
3
4
5
¾ Draw seat belt (3) from retractor on the left
without jerking .
¾ Position belt over lap, not over stomach.
¾ Allow buckle (2) to snap into plac
eincatch
lock of belt (4).
¾ Check seat belt tension.
Belt must fit close to the body.
Open seat belt
¾ Press red button (5) on catch lock (
4).
¾ Move buckle (2) with hand back to belt re-
tractor (1).
NOTE
The automatic blocking mechanism may be
triggered if the belt runs in too fast when the
buckle strikes the housing. The belt cannot be
pulled out with the normal force .
30 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
