Operation 4
Standard equipment
NOTE
Pressing down the accelerator pedal hard is
to no advantage as the maximum acceleration
rate is controlled automatically.
Reverse motion
¾ Carefully press left accelera
tor pedal (5).
Control light (9) lights up.
The forklift truck will reverse back slowly or
quickly depending on the position of the accel-
erator pedal .
Changing direction
¾ Release accelerator pedal pres
sed.
¾ Press the accelerator pedal for the opposite
direction of travel.
The forklift truck will be electrically braked
until stationary and then accelerated in the
direction specified.
¾ Both feet should be left on the acc
elerator
pedals so that the forklift truck
is easily con-
trolled in every driving movemen
t.
Operating Instructions – 386 807 1001 EN – 03/2006 35
To Next Page
Loading...
