5 Servicing
Inspection and maintenance as required
Connect battery to external charger
CAUTION
Chargers with a charging current exceeding 160 A
will damage the battery plug irreparably.
The charger used to recharge the battery should
not exceed a charging current of 160 A.
If the charger available exceeds this current, please
contact your authorised dealer .
¾ Fully lower fork carriage.
The fork arms must touch the ground.
1
2
e3861358
¾ Turn the parking brake (1) clockwise
through 90 degrees.
¾ Open battery cover and flap back.
e3861341
45
¾ Remove battery plug (5) from socket (4).
¾ Connect connector plug of charger to bat-
tery plug (5).
¾ Switch on charger.
92 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
