Servicing 5
Inspection and maintenance every 3000 operating hours or every 2 years
Check condition of anti-static belt
¾ Check the secure positioning of the anti-
static belt on the floor of the frame and ex-
amine for wear.
¾ Replace the anti-static belt if damaged.
NOTE
The anti-static belt must alway
s be in contact
with the floor.
Change breather
NOTE
With high levels of dust it may
be necessary to
change the filter earlier.
¾ Screw breather (1)with oil dipstick (2) out of
filler neck.
¾ Remove dipstick (2) from breather (1) and
fit new breather.
¾ Screw breather back into fill
er neck.
Operating Instructions – 386 807 1001 EN – 03/2006 121
To Next Page
Loading...
