D9U001MC5-0101_08
17
► Never cover the SCU while in use.
► Select a suitable location for the placement of bed accessories and other objects to prevent involuntary activation of
buttons or controls which may result in the adjustment of bed positioning.
► Do not use the bed in the event parts have been removed (e.g. parts of mattress platform) unless these parts are de
signed to be removed (e.g. head and/ or foot end of the bed).
► Never place any accessories or handset on the siderails in the area where the integrated siderail controller is located.
► After each emergency situation always check if any of the controllers (in siderails, hand set or ACP) is not involuntarily
pressed by the bed accessories or by the mattress.
► The weighing system must be tested at regular intervals and in accordance with the metrological regulations of the
relevant country. All testing and certication must be carried out by qualied personnel. The healthcare provider is
responsible for ensuring the required testing frequency and testing procedure of the weighing system is carried out.
► To avoid injury or crushing, take extra caution when operating any moving parts of the bed.
► To avoid unintended activation of moving parts during any use of the bed always check that none of the control elements
of the bed is not involuntary pressed by persons, mattress or other objects.
To Next Page
Loading...
Need help?
General
