D9U001MC5-0101_0862
15.7 Protector
WARNING!
Risk of injury due to the patient falling off the bed!
► Ensure that the Protector is installed securely.
► Always check that the siderails are properly locked.
The Protector is an optional accessory for the Multicare LE bed. The main purpose of the Protector is to reduce the risk of patients
falling off the bed.
Fig. Multicare LE bed with Protector
1. Inserting the Protector into the casing in the protective ring on the corner
2. The Protector inserted in the casing
3. The xing element attached to the telescopic prole of the bed extension
4. The Protector attached to the Multicare LE bed (The Protector can also be used on expanded beds.)
Attach the Protector to the bed as follows:
► Insert the Protector pin into the casing in the protective ring at the corner of the foot end of the bed (1).
► Ensure that the xing element is secured to the telescopic prole of the bed extension (3).
Remove the Protector from the bed as follows:
► Grasp the upper end of the Protector.
► Remove the Protector from the casing.
To Next Page
Loading...
Need help?
General
