D9U001ES2-0101_02
39
10.1 Connection of the Power Supply Cord
Fig. Power Supply Cord leading from the undercarriage cover and wound around the Accessory Rail
WARNING!
Do not expose the place of connection to liquids! Use only a damp cloth or a wet wipe to clean the Power
Supply Cord and the place of connection of the Power Supply Cord to the undercarriage cover!
WARNING!
Ensure the stretcher height adjustment will not damage the Power Supply Cord connected to the Sprint 200
with i-Drive Power!
WARNING!
Power Supply Cord must not be wound around the Accessory Rail or DIN Rail at head end of the Sprint 200
with i-Drive Power before and when the Power Supply Cord is connected to the mains power!
To Next Page
Loading...
Need help?
General
