D9U003VB3-0101_0444/65
11.2 ControlsandIndicators(ControlPanel)
For picture of the Control Panel see chapter 5 Control Panel Description.
11.2.1 Button GO
The GO button activates the SCU control panel.
After pressing the button , the SCU control panel will remain active for 3 minutes.
To activate control panel:
Press the button .
Button/Indicator Function
Pressure Control Buttons Changing air pressure in mattress.
MODE Button Selects desired mode:
APT = Alternating Pressure Therapy Mode
CLP = Constant Low Pressure Mode
Seat Cushion Indicator Indicates that seat cushion is connected.
Fowler Boost Indicator Indicates if backrest is raised.
CPR/ Air Connector Open Indicator Indicates that air pipe is not connected correctly or not at all.
System Error Indicator Indicates system error.
Call service department authorized by manufacturer.
Mute Button Muting audio alert signals.
Service Due Indicator Indicates that service is due.
GO Button Activates the control panel.
Accumulator Charge Status Indicator
(accumulator back-up model only)
Indicates charge status of accumulator.
Pressure Level Indicators Indicate the air pressure set in mattress. Pressure Level Indicators are active
only in APT Mode or CLP Mode. Pressure Level Indicators are disabled in
MAX Mode or when Seat Cushion is connected to SCU.
To Next Page
Loading...
Need help?
General