D9U003VB3-0101_0454/65
11.12 Seating System
For patients who are not bed-ridden, it is possible to connect a seat cushion
operating in a 2-cell cycle to the SCU instead of the mattress. The LINET®
geriatric care.
The seat cushion consists of two sets of alternating cells on a foam base with
a front support. The cover consists of vapour-permeable, water-impermeable
two-way stretch material.
The LINET Dynamic seat cushion is available in two versions replacement or
required.
vary.
11.12.1 Functioning
The seating system provides alternating pressure therapy for patients that are not bed-ridden.
Seat cushion:
six cells (two sets of three)
11.12.2 Installation of Seat Cushion
Fig. Replacement Seat Cushion
WARNING!
Riskofinjuryduetounsuitablechair!
Suitable chair is in accordance with dimensions of the seat cushion (50 cm x 45 cm).
There are no protruding parts or sharp objects on the surface of the seat base.
Conduct risk evaluation if necessary.
WARNING!
Riskofinjuryduetoexposedcable!
Ensure that neither the air umbilical or SCU cable are twisted, crushed or strained.
Ensure that neither the air umbilical or SCU cable present tripping hazard.
To Next Page
Loading...
Need help?
General