D9U003VB3-0101_0464/65
15 Disposal
15.1 Environment Protection
The company LINET® is aware of the importance of environmental protection for future generations. Within this company
the environmental management system is applied in accordance with the internationally agreed standard ISO 14001. The
compliance with this standard is annually tested by the external audit executed by an authorised company. Based on the
Directive No. 2002/96/EC (Directive WEEE - Waste, Electric and Electronic Equipments) the company LINET, s. r. o. is
registered in the List of Electric and Electronic Equipment Producers (Seznamvýrobcůelektrozařízení) on the Ministry
Materials used in this product are not environmentally hazardous. LINET® products meet valid requirements of national
and European legislation in the areas of RoHS and REACH, so they do not contain any prohibited substances in excess
quantities. None of the wooden parts is made of tropical wood (such as mahogany, rosewood, ebony, teak etc.) or made
of timber from the Amazon region or from similar rainforests. Product noise (sound pressure level) meets requirements
spaces of buildings (according to standard IEC 60601-2-52). Used packaging materials are in accordance with require-
ments of the Packaging Act (Zákonoobalech).
For disposal of packaging materials after installation of products contact your sales representative or manufacturer´s
customer service about the possibility of a free take-back of packaging through an authorized company (more details on
www.linet.cz).
15.2 Disposal
The main objective of the obligations arising from the European Directive No. 2012/19/EU on Waste, Electric and Electro-
nic Equipments (nationally regulated in Act No. 185/2001 Coll. as amended. On Waste and in Decree of the Ministry of
the Environment No. 352/2005 Coll. as amended), is to increase the re-use, material recovery and recovery of electric
and electronic equipment at the required level, thereby avoiding the production of waste and thereby avoiding the po-
environment. LINET® electric and electronic equipments that have a built-in battery or accumulator are designed so that
-
tion about its type on the built-in battery or accumulator.
15.2.1 Within Europe
To dispose of the electric and electronic equipment:
To dispose of the other equipment:
LINET® participates in a collective system with take-back company REMA System (see www.remasystem.cz/sberna-
-mista/).
By bringing electric and electronic equipment to a take-back point, you participate in recycling and you save primary raw
15.2.2 Outside Europe
To Next Page
Loading...
Need help?
General