Linksys LRT224

17
Setup
Linksys
Adding a service
To add a new service item or to edit an existing service, click Service
Management. If the web browser displays a warning about the pop-up
window, click to allow the blocked content.
In the Service Management window, add or edit entries as needed. After
setting a rule, be sure to click OK to save your settings, or click Cancel to undo
them. To add a service to the list, enter the following information, and click
Add to List. You can have up to 30 services in the list.
• ServiceName: Give a name to the service.
• Protocol:Choose the required protocol: TCP, UDP or IPv6.
• PortRange:Enter a range.
•
Toaddanothernewservice: Enter the information, and then click Add
to list.
• Toeditaserviceyoucreated:Select the service in the list and then click
Update to make the changes. If you do not need to make changes, click
Add New to deselect the service and clear the text fields.
• Todeleteaservicefromthelist: Click Delete to delete an existing service.
Port Triggering
Some Internet applications use alternate ports to communicate between the
server and LAN host. Port Triggering opens a port range for those services.
The device will forward the incoming packets to the assigned LAN host.