Linksys LRT224

23
Setup
Linksys
HopCount(Metric,max.is15): This is the router layer count for the IP. If
there are two routers under the device,
users should input “2” for the router
layer. The default is “1.” (Max. is 15.)
Interface: SelectWANportorLANportfor
networkconnectionlocation.
Select LAN if this router gets Internet
connectivity from a gateway router on
your LAN.
AddtoList: Add the routing rule into the list. You
can enter up to 30 routes.
Delete: Remove the selected routing rule from
the list.
IPv4
IPv6
Outgoing Mail Server
The router allows log messages and OpenVPN client’s configuration file (.ovpn)
to be sent to external email address. You can configure outgoing mail server
by going to Configuration > Setup > Outgoing Mail Server.
Sender Email address of sender.
MailServer: Hostname or IP address of SMTP mail
server.
For Google’s SMTP server, you can
find the information from Google
support page at https://support.
google.com/a/answer/176600?hl=en
Authentication: Authentication type, such as Login
Plain, TLS and SSL.