Home Office Phone Service
Owners Manual AccessLine 02-15-10
11
Assigning Phone Numbers to Your Phone Service
Each phone line (labeled on the back of the Phone Adapter as PHONE 1
and PHONE 2) you purchase will receive its own phone number. This
way you will have a dedicated phone number for your phone line and one
for your optional fax line. You will receive an email from AccessLine
Communications with your new phone numbers.
Installing the VoIP Phone Adapter
1. Plugging in Your Phone
Use your existing phone and phone cord and plug the phone cord from the
phone into the port on the back of the VoIP Phone Adapter labeled
PHONE 1.
Note
The VoIP Phone Adapter only works with analog phones. Analog
phones are the most common types of phones and will plug into any
standard telephone jack. The VoIP Phone Adapter does not work with
IP or VoIP phones.
2. Connecting your Fax Machine
Use your existing fax machine and fax cord and plug the phone cord from
the fax machine into the port on the back of the VoIP Phone Adapter
labeled “PHONE 2”.
For best performance with Home Office Phone Service:
If your fax machine has an “ECM” (“Error Correction Mode) feature,
please disable this function,
Check your fax machine’s speed (sometimes called “Baud Rate”), and set
it to 9600 or lowest possible speed.
To Next Page
Loading...
Need help?
General
