85
Table of Contents
Linksys
• Port—Select the port for which storm control is enabled.
• Storm Control—Select to enable Storm Control.
• Storm Control Mode—Select one of the modes:
• Unknown Unicast, Multicast & Broadcast—Counts unknown Unicast,
Broadcast, and Multicast traffic towards the bandwidth threshold.
• Multicast & Broadcast—Counts Broadcast and Multicast traffic
towards the bandwidth threshold.
• Broadcast Only—Counts only Broadcast traffic towards the
bandwidth threshold.
• Storm Control Rate Threshold—Enter the maximum rate at which
unknown packets can be forwarded. The default for this threshold is
10,000 for FE devices and 100,000 for GE devices.
STEP 4 Click Apply. Storm control is modified, and the Running
Configuration file is updated.
To Next Page
Loading...
