36
Table of Contents
Linksys
36
Table of Contents
Linksys
• Device Class—LLDP-MED endpoint device class. The possible device
classes are:
• Endpoint Class 1—Generic endpoint class, offering basic LLDP services.
• Endpoint Class 2—Media endpoint class, offering media streaming
capabilities, as well as all Class 1 features.
• Endpoint Class 3—Communications device class, offering all Class 1
and Class 2 features plus location, 911, Layer 2 device support, and
device information management capabilities.
• PoE Device Type—Port PoE type; for example, powered.
• PoE Power Source—Port power source.
• PoE Power Priority—Port power priority.
• PoE Power Value—Port power value.
• Hardware Revision—Hardware version.
• Firmware Revision—Firmware version.
• Software Revision—Software version.
• Serial Number—Device serial number.
• Manufacturer Name—Device manufacturer name.
• Model Name—Device model name.
• Asset ID—Asset ID.
Location Information
• Civic—Street address.
• Coordinates—Map coordinates: latitude, longitude, and altitude.
• ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy
• Application Type—Network policy application type; for example, Voice.
• VLAN ID—VLAN ID for which the network policy is defined.
• VLAN Type—VLAN type for which the network policy is defined. The
possible field values are the following:
• Tagged—Indicates the network policy is defined for tagged VLANs.
• Untagged—Indicates the network policy is defined for
untagged VLANs.
• User Priority—Network policy user priority.
• DSCP—Network policy DSCP.
LLDP Neighbor Information
The LLDP Neighbor Information page contains information that was received
from neighboring devices.
After timeout (based on the value received from the neighbor Time To
Live TLV during which no LLDP PDU was received from a neighbor), the
information is deleted.
To view the LLDP neighbors information:
STEP 1 Click Configurations > Port Management > Discovery - LLDP > LLDP
Neighbor Information.
This page contains the following fields:
• Local Port—Number of the local port to which the neighbor is connected.
Global
• Local Port—Port number.
• MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
• System Name—Name of system that is published.
• System Description—Description of the network entity (in alpha-numeric
format). This includes the system name and versions of the hardware,
operating system, and networking software supported by the device. The
value equals the sysDescr object.
To Next Page
Loading...
Need help?
General
