2
Table of Contents
Linksys
Interface Naming Conventions
Within the GUI, interfaces are denoted by linking the following elements:
Type of interface: The following types of interfaces are found on the switch:
• Gigabit Ethernet ports (displayed as GE).
• LAG (Port Channel) (displayed as LAG).
• VLAN (displayed as VLAN).
• Interface Number: Port, LAG or VLAN ID
Window Navigation
This section describes the features of the Web-based switch configuration utility.
Application Header
The Application Header appears on every page. It provides the following
application links:
Application Link
Name
Description
Logout Click to log out of the Web-based switch
configuration utility.
Firmware Version Display the device version number.
Help Click for the link to this administration guide.
Management Buttons
The following table describes the commonly used buttons that appear on
various pages in the system.
Button Name Description
Add Click to display the related Add page and add an entry
to a table. Enter the information and click Apply to save
it to the Running Configuration. Click Close to return to
the main page. Click Save to display the Configuration
File Copy page and save the Running Configuration to
the Startup Configuration file type on the device.
Apply Click to apply changes to the Running Configuration
on the device. If the device is rebooted, the Running
Configuration is lost unless it is saved to the Startup
Configuration file type or another file type. Click Save to
display the Configuration File Copy page and save the
Running Configuration to the Startup Configuration file
type on the device.
Button Name Description
Close Click to return to the previous page. Any changes not
applied are cleared.
Clear All Click to clear the statistic counters for all interfaces.
Clear Click to clear information, such a counters of an interface
or all interface, or log files.
Delete After selecting an entry in the table, click Delete to
remove.
Edit Select the entry and click Edit. The Edit page appears, and
the entry can be modified.
1. Click Apply to save the changes to the Running
Configuration.
2. Click Close to return to the main page.
Search Enter the query filtering criteria and click Search. The
results are displayed on the page.
Refresh Click Refresh to refresh the counter values.
Test or Start Click Test/Start to perform the related tests.
View or View All Click View to display details associated with the entry
selected or for all entries (respectively).
To Next Page
Loading...
Need help?
General
