DRAFT
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
50
DirEntry – A script that describes a directory entry
Syntax: n=name;p=phone;r=ring-tone-id
name is the name of the entry
phone is the phone number or URL of the entry
ring-tone-id is the ID of the ring tone (1–10) that should be played when the entry is called.
Example 1: n=Joe Smith;p=14089991234
(ring-tone = default)
Example 2: p=123456@192.168.2.12:5061;r=5
(unknown name)
ProvisioningRuleSyntax – Scripting syntax used to define configuration resync and firmware upgrade
rules. Refer to the provisioning discussion for an explanation of the syntax.
DialPlanScript – Scripting syntax used to specify line 1 and line 2 dial plans. Refer to the dial plan
section of this document for an explanation.
To Next Page
Loading...
