Linksys SPA941 - System Parameters; System Configuration; Network Configuration

DRAFT
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
51
System Parameters
System Configuration
Parameter Name Description Type Default
Restricted Access
Domains
This feature is used when implementing software
customization.
Str127
Enable Web Server Enable/disable web server of SPA
.
Bool Yes
Web Server Port TCP port through which the SPA web server will
communicate
Uns8 80
Enable Web Admin
Access
Enable/disable Admin pages of web server of SPA Bool Yes
Admin Password The password for administrator Str63
User Password The password for User Str63
Network Configuration
Parameter Name Description Type Default
DHCP Enable/Disable DHCP Bool Yes
Host Name Host Name of SPA Str31
Domain The network domain of SPA Str127
Static IP Static IP address of SPA, which will take effect if DHCP
is disabled
IP 0.0.0.0
NetMask The NetMask used by SPA when DHCP is disabled IP 255.255.255.
0
Gateway The default gateway used by SPA when DHCP is
disabled
IP 0.0.0.0
Primary DNS DNS server used by SPA in addition to those supplied
by DHCP server if DHCP is enabled (See “DNS Server
Order” for more information); when DHCP is disabled,
this will be the primary DNS server.
IP 0.0.0.0
Secondary DNS DNS server used by SPA in addition to those DHCP
server supplied if DHCP is enabled (See “DNS Server
Order” for more information); when DHCP is disabled,
this will be the secondary DNS server.
IP 0.0.0.0
DNS Server Order Controls how to organize the DNS servers supplied by
DHCP server and the ones statically configured; it is
used only when DHCP is enabled.
Manual: Use statically configured DNS servers if there
is any; otherwise, use the ones supplied by DHCP
server.
Choice Manual