Linksys SPA941 - Reboot URL; 16 Performance Reporting Features; Call Statistics and Reporting

To Next Page

To Previous Page

DRAFT

Note: The SPA will resync only when it is idle.

The syntax of Resync URL is:

http://<spa-ip-addr>/resync?[[protocol://][server-name[:port]]/profile-pathname]

• If no parameter follows “/resync?”, the profile rule setting in provisioning is used.

• If no protocol is specified, TFTP protocol is assumed. Note: Only TFTP is supported in the current

release.

• If no server-name is specified, the host that requests the URL is used as server-name.

• If no port specified, default port of the protocol is used – 69 for TFTP.

• The profile-path is the path to the new profile to resync with.

For example:

http://192.168.2.217/upgrade?tftp://192.168.2.251/spaconf.scf

Reboot URL

Through the Reboot URL, the user can reboot the SPA.

Note: Upon request, the SPA will reboot only when it is idle.

The Reboot URL is:

http://<spa-ip-addr>/admin/reboot

• Performance Reporting Features

Call Statistics and Reporting

The following lists the statistics collected by the SPA during normal operation. These statistics are

presented in the SPA web-page (under the “Info” tab). Line status is reported for each line (1 and 2).

Each line maintains up to 2 calls: Call 1 and 2.

System Status

Current Time Current time and date. E.g., 10/3/2003 16:43:00

Elapsed Time Total time elapsed since last reboot. E.g., 25 days and 18:12:36

Broadcast Pkts Sent Total number of broadcast packets sent

Broadcast Pkts Recv Total number of broadcast packets received

Broadcast Bytes Sent Total number of broadcast bytes sent

Broadcast Bytes Recv Total number of broadcast bytes received and processed

Broadcast Packets Dropped Total number of broadcast packets received but not processed

Broadcast Bytes Dropped Total number of broadcast bytes received but not processed

RTP Packets Sent Total number of RTP packets sent (including redundant packets)

RTP Packets Received Total number of RTP packets received (including redundant packets)

RTP Bytes Sent Total number of RTP bytes sent

RTP Bytes Received Total number of RTP bytes received

Other manuals for Linksys SPA941