Linton LT-9600 - Use this Radio as Repeater

30
Use this radio as repeater
This radio can be used as repeater to enlarge
communication range.
1.Please switch DW function on firstly.
● Please reference to “Dual Frequency/Dual Display/Dual
Standby(DW)” in Page 15.
2.Press [MENU] key to access menu system, then use
[UP]/[DOWN] key to select Menu No.30 and press [F] key to
confirm selection.
3.Use [UP]/[DOWN] key to circularly select from the
following 3 modes:
OFF: switch repeater function off, can’t be as repeater.
R.M T.A:main working band as receiving channel, subsidiary
working band as transmitting channel.
R.F T.O:current receiving working band as receiving channel,
the other working band as transmitting channel.
●When select “OFF’, it means you switch repeater function off; if you
select “R.M T.A” or “R.F T.O”, it means you switch repeater function
on.
4.After your selection, press [F] key to confirm and return
back working mode.
5.Press [PTT] button to quit menu system.