Linton LT-9600 - Initializing Memory; Partial Initialization (VFO)

44
Initializing Memory
If your transceiver seems to be malfunctioning, initializing the
transceiver may resolve the problem. Remember that you
need to re-program memory channels after initialization. On
the other hand, initialization is a quick way to clear all
memory channels.
Note:
While using the Channel or Transceiver Lock function, you can’t do
Partial Reset nor Full Reset.
■Partial Initialization (VFO)
Use to initialize all settings except the Memory Channels and
Memory Channel Lockout.
1. Press [F]+Power On.
● A confirmation message appears.
2. Then use [UP]/[DOWN] key to select “RESET VFOSET
002”.
●A confirmation message appears.