Linton LT-9600 - Memory Channel; Storing Data in Memory Channels

39
MEMORY CHANNEL
In memory channels, you can store frequency and related
data which you often use. Then you don’t need re-program
these data each time. Just by simple operation to recall the
channels you needed. There are total 200 memory channels
for selection.
Storing Data in Memory Channels
1.In VFO mode, select the desired frequency.
2.Press [F]+[V/M] key.
● A memory channel number appears.
3.Input 3 digits channel number via keypad.
●If the channel selected in the previous step already contained data, the
channel number will flash, otherwise, this channel number is not used.
4.Press [V/M] key to complete and return to VFO working
mode.
●The selected frequency and related data are stored in the
memory channel.
●If the channel selected in the previous step already contained data, the
new data will overwrite the old one.