42
confirm selection.
●”NAME” will flash on LCD display.
4.Use [UP]/[DOWN] key to select working mode.
FREQ: display frequency and memory channel number.
CHANNEL: only display memory channel number.
NAME: display memory channel name edited by user.
5.If want to switch this function OFF, please operate from
Step 3~Step 4.
6.Press [PTT] button to exit setting mode.
Clearing Current One Memory Channel
1.In MR/CH/NM mode, user [UP]/[DOWN] key to select a
memory channel which will be erased.
2.Switch OFF the power of the transceiver. Then press and
hold [F] key, meanwhile, switch the power ON.
●A confirmation message “RESET ALL 001” appears.
3.Use [UP]/[DOWN] key to select “RESET CURCH 003”
menu.
To Next Page