Linton LT-9600 - Set up FM Radio Memory Channels; Recall FM Radio Memory Channel

62
2.Press [F]+[3] key. The transceiver will star to scan.
●When a channel to be scanned, the transceiver will stop
scanning and show the current broadcast frequency.
●You can only search the stronger FM radio program via Menu
No.14.
3.Use [UP]/[DOWN] key to scan next channel.
4.To exit scanning mode, just press [PTT] button.
■Set Up FM Radio Memory Channels
1.In VFO/MR/CH/NM mode, press [F]+[MENU] key to select
“B1” as current working band. The FM radio function will be
turned ON.
2.Select a memory channel number via keypad or use scan
function to select a channel, then press [F]+[V/M] key.
3.Input memory channel number via keypad.
●If the channel selected in the previous step already contained data, the
channel number will flash, otherwise, this channel number is not used.
4.Presss [V/M] key to save and return back to VFO working
mode.
■Recall FM Radio Memory Channel
1.In VFO/MR/CH/NM mode, press [F]+[MENU] key to select
“B1” as current working band. The FM radio function will be