48
Scan Operation
Scan allows you to scan all frequencies from the lowest to
the highest frequency on the band. The current frequency
step size is used.
1. In VFO/MR/CH/NM mode, Press [F]+[3] key to star scan.
● Scan starts at the frequency currently displayed.
●To reverse the scan direction, use [UP] (upward scan) or [DOWN]
(downward scan) key.
2 To quit Scan, press any key other than [UP]/[DOWN] key.
Note:
●In MR/CH/NM mode, there must be 2 memory channels at least.
●The squelch function must be close before scan.
Locking Out Memory Channels
You can lock out memory channels that you prefer not to
monitor during Memory Channel Scan.
1.Through one of Menu No.34, 35, 36, 37, 39, 40 to program
the long press or short press programmed feature of
[P1]/[P2]/[P3] key is: “SCN SW”(Current Channel Scan
Add/Del).
2.In MR/CH/NM mode, use [UP]/[DOWN] key to select the
memory channel to be lock out/unlock out.
To Next Page
Loading...