47
TO(Time-Operated Mode)
Your transceiver stops scanning when detecting a signal,
remains for approximately 5 seconds, and then continues to
scan even if the signal is still present.
CO(Carrier-Operated Mode)
Your transceiver stops scanning when detecting a signal and
remains on the same channel until the signal drops out.
There is a 2 seconds delay between signal drop-out and
scan resumption to allow time for any responding stations to
begin transmitting.
SE(Search-Operated Mode)
Your transceiver stops scanning and remains the current
signal when detecting a signal.
4.Press [F] key to finish setting and return back to menu
system.
5.Press[PTT] button to exit menu system and return back to
previous working mode.
To Next Page
Loading...