Lippert Components Happijac Installation Manual

Rev: 07.03.18 Page 13
CCD-0001541
Manually Lower the Bed(s)
Do the following in order:
1. Unplug the motor from the control module (Fig. 23).
2. Release the brake (Fig. 23). Bed(s) will drift downward.
3. Apply the brake when bed(s) reach the desired height.
4. Plug the motor cable into the control module.

Lippert Components Happijac Specifications

General

Brand	Lippert Components
Model	Happijac
Category	Lifting Systems
Language	English