PITCH ARM AWNING ASSEMBLY REPLACEMENT
TI-258
DOORS
Moving Parts can pinch, crush or cut. Keep clear and use caution.
Purpose
This document provides the steps to replace the awning pitch arm assembly.
Resources Required
• 2 People
• Pliers
• Flat Head Screwdriver
•
⁄
" Deep Well Socket
• C-clamp (optional)
Fig. 1
Fig. 2
Installation
NOTE: Fig. 1 and Fig. 2 show two different types of pitch arms. The removal and replacement of the pitch arm will
be the same.
1. Extend the awning to the fully-open position.
2. With a flat head screwdriver carefully remove the black spacers that are placed in between the pitch arm and
the outer arm (Fig. 3A) and in between the pitch arm and the mount arm (Fig. 4A).
A
A
Fig. 4
Fig. 3
A A
A
To Next Page
Loading...
