-24-
4.3. Move with the forklift
Danger!
The masonry saw may only be transported or moved in transport position.
Danger!
Personnel should never remain under hanging loads.
The masonry saw can be picked up and moved with a forklift truck using the forklift supports
(Pos. 14)
The machine must be completely grasped with the forks of the forklift
Name expert instructors before the lifting process
Only use a suitable lifting device with sufficient load capacity
Lift carefully and pay attention to the centre of gravity
Always keep an eye on the masonry saw
Secure loads reliably. Use suitable attachment points
When recommissioning, follow the operating manual
To Next Page
