-30-
7. CONDITIONAL CONNECTIONS
Conditional connections according to EN 61000-3-3:2009 or IEC 61000-3-11
RA=0.15Ω
jXA=0.1Ω at 50 Hz
RN=0.1Ω
jXN=0.06Ω at 50 Hz
8. TOOLS
Depending on the application purpose and area, tools are different.
To have the best results, the parameters must match.
With this diagram, the optimal cutting performance can be determined.
Note
In the LISSMAC sales booklet DIAMOND TOOLS, the tools can be determined.
This sales booklet can be obtained from the manufacturer at any time.
Storage of tools
The used tools must be protected by moisture. The applied segments around the saw blade must
be protected from damage.
To Next Page
Loading...
