Lissmac DTS 901-V - Selection of the Tool; Basics of Intended Use

-9-
1.1. Selection of the tool
 Only diamond saw blades should be used
 Cutting with toothed saw blade is prohibited
 The saw blade requires input of direction of rotation and must be specified for the intended
use in this machine. Saw blade diameter, speed and adapter must fit the machine
 Damaged saw blades must not be used.
Note In the LISSMAC sales booklet DIAMOND TOOLS, the tools can be determined.
This sales booklet can be obtained from the manufacturer at any time.
1.2. Basics of intended use
1.1.1 The warranty obligation of the manufacturer and supplier is voided for improper or non-intended
use. Any change to the machine which is not carried out by the manufacturer is prohibited.
Changes, removal or addition of parts to the masonry saw only with the written approval of the
manufacturer.
1.1.2 The machine is constructed according to the state of the art and recognised technical safety rules.
However, danger to life and limb of the user or third parties, and/or damage to the machine or other
property may still arise from its use.
1.1.3 Only use the machine in technically faultless condition and for intended use, aware of safety and
danger complying with the operating manual. You should particularly handle malfunctions which
can compromise safety immediately, or have them addressed by experts.
1.1.4 The LISSMAC masonry saw is made exclusively for sawing mineral material, in the wet cutting
method. Sawing of wood, plastic or metal and other materials is not intended use. The masonry
saw may only be operated by one person. The operation is limited through the intended position of
the operator directly on the feed crank (Pos. 17) or directly in front of the push handle by the saw
table (Pos. 11). Any other use or use above and beyond is not considered intended use. The safety of
this machine is only guaranteed when correct saw blades for this machine are used.
Intended use also includes compliance with the operating manual and observance of inspection and
maintenance manual.
1.1.5 Foreseeable misuse / non-intended use:
 Sawing without saw hood
 Sawing without water
 Sawing of wood, plastic or metal
 Any constructional changes, which change the safety or the type of design